Sunday, 7 April 2013

It’s time to build a house–Part 1 Picking a Block?


So where did it start?  I think it started when me and my wife were both waiting for our children to finish with the toilet.  We did know this house was only going to be a short part of our journey through life.  It was great when the kids were babies, now they were growing up it was time for our house to grow.  Unfortunately extending our house was not an option.  The question was to buy or build?
The first place to look was at our budget, how much could we afford?  A meeting with the bank soon established what we could borrow, however we had to decide how much we wanted to borrow and set that budget.  Don’t be fooled into borrowing too much, if you go the maximum will you still be able to live?  I am a cautious guy so looked at what would be comfortable without effecting our family lifestyle (I would hate to lose our weekends away or the kids sport).
Now we had a ball park of what would could spend the question is what can that buy?  My wife wanted to build, me I wanted just to be able to move straight into a bigger house.  So we compromised, we started looking at what was available in the area we wanted to live in our price range.  It was depressing.  There weren’t many houses around in the price bracket we were looking at, and none felt like a home, and none were what I would call newish (under ten years old).  I know when buying an established house many of the dreams and wish list items may have to be compromised on, but nothing came close.  So far it looked as if my wife would win.
Having struck out with an established home its time to think new build.  Now we have two questions (well about a million really).  The first where is there land available.  The second is what type of house is the dream?  Luckily we live in a growing area so there were a few new estates opening to choose from.  The best luck was that a new estate was about to open just next to where we lived.  As it was going to be a first release of land, there would be a ballot system to gain land.  To be in the ballot you had to select just three blocks from about one hundred.  How to choose?
brooks reach diagram
We spent hours looking at the maps, contour plans, checking the price list, sitting out at the rural land that would become the housing development.  We had a few wishes. We wanted bigger than our current block, flat land, and hopefully a view.  If I knew then what I know now I would have added to that large frontage.  It is amazing how much effect how wide your block is affects your choices.  A wider lot means you are less limited on house size, you may be able to add the third garage or pool and gives the builder more room to work.  Sloping blocks limit house design and rapidly increase building site costs.  Farmland and trees can add bush fire restrictions.  Planned sewer pipes, water pipes etc. may limit whether you can build on or two story homes and add extra building costs.  All of this needs to be taken into very serious consideration, a bad choice now could add up to a lot of money in the long run.  As we only had one shot we had to try and pick the best blocks we could and keep the fingers crossed.  We found a block 20m wide and 45m long, which in todays standards is big, not the biggest but big and allowed enough money left over to build the dream.
054
We were lucky in the lottery and got our number two choice; big. flat and an amazing view.  Now to pick a home.
lot 212 2

Wednesday, 23 January 2013

Bosch Oscillating Multi-Tool


Ok, these kind of tools have been around in the woodworking world for sometime.  Only recently have oscillating tools become in vogue in the general handyman world, and I have had my eye on one for a while.  So when my wife said would I like to try one I jumped at the chance.
DSCN7213
Ok, so first thing first this is the Bosch GOP300SCE (professional model).  It is the sturdy high end version of the popular multi-tool.  Unlike most saws it cuts with a very small but high speed oscillation (blade going back and forth), so is safer.  According to a competitors advert these things can’t cut you, however I am not game to try that and I am sure I've seen the doc on CSI opening a skull with one.  Perhaps I will try it on the next leg of pork my wife brings home. This rapid oscillation also makes it an effective grinder and sander (hence a multi-tool!).
DSCN7217
This test model comes in a great sturdy case.   Usually I hate the plastic case as they take up room and the tool lead can never fit back in it.  Bosch however had provided a great box with plenty of room, fold down handles and it clips to other Bosch product boxes.  When you open the box you also find another box full of goodies (a little Aladdin's cave).  This contains the myriad of different accessories that come with it.  This is good if you want to travel light and not carry the whole box around.
DSCN7226
Now down to business.  It looks sturdy, and feels sturdy.  I was always told you can tell the durability of a tool by checking out the power lead – its thick and solid. The unit is a little heavy (1.4kg) but easy and ergonomic to hold.  The great thing is the Tool less accessory change lever.  Just pull this to release the current accessory, place on the required accessory, snap the lever back and keep on working.  The lever is a little stiff to move but not beyond on the realms of normal strength, and it is certainly better than cursing and muttering while you fiddle will Allen keys or lock nuts.
DSCN7225
There is a generous amount of power (300Watts) controlled by a variable speed dial at the rear of the unit which allows from 8000 to 20000 Oscillations per minute  With this high rate of oscillation you would expect a lot of vibration, however it remained smooth.
DSCN7232
So what can it do?  I used it this afternoon on a few little projects.  Firstly it cuts, I trimmed out a small shelf from a sheet of melamine to put in a cupboard (my wife has been asking me to do this for a while).  It would have been quicker to use a jig saw but it cut a nice straight line, smoothly and fairly quickly.  The small tooth and lack of motion left the cut smooth with no tear out on the melamine sheet.  Then a very quick change (love the tool less change) to the sanding pad (this particular model comes with about 12 sanding sheets from 80grit to 120 grit), and sanded the edges.  I was impressed with the sander and definitely think it be useful in tight spots when sanding furniture and will probably find some good uses in the wood working projects. 
DSCN7236
Next was a kitchen knife that had the tip broken.  I put on the grinding attachment and quickly re-shaped the blade and put a rough edge on before honing on a water stone. There are lots of other attachments for plunge cutting, removing grout and nearly any DIY project.  Next week I have to build a deck for my parents so think the other cutting blades will get a work out.  Bosch also sell a wide range of accessories check out their website.
Overall opinion? Its a nifty bit of equipment that covers the need for multiple tools.  There is little vibration and not too noisy.  This model is aimed at the professional tradesperson at $350, however there are more basic model starting around $150 for the weekend handy man.
DSCN7223
What is your favourite go to tool in the shed?
I didn’t pay for this product, it was given free to my wife to trial but I stole it.  All opinions are that of me and me alone.

Thursday, 17 January 2013

Beginnings


As I sit at my parents house pining for my workshop I have got to thinking about my woody beginnings.  I’m not really talking my poor attempts at high school woodwork, but my first attempts at a new found hobby.
IMGP2048
This was it, not really inspiring.  I just put a peace of scrap pine between centres, spun up the lathe and with no knowledge of what each tool did, speed changes, or what was safe.  This was it, tear outs galore, no objective shape, but about 20cm of pure joy.  I still have it hidden away in a box somewhere.
I soon wanted to investigate more.
PB020372
This was my first bowl.  It was made of layers or scrap pine stuck together (pine is very under-rated).  It has thick walls where I was too scared to go too thin and lots of chips and tears.  Again it was a work of enjoyment.  Now I would be horrified to produce something, how shall I put it, rustic?  Also turning wood has made me a better photographer, these early shots are not so well composed, or even focused.
goddess 020
And finally my first pen.  This was a slimline made from, I don’t know what……wood.  Its turned too thin, the ends are undersized and it looks a little wrong, but I still use it today.
Of course these are all learning experiences.  With each creation comes knowledge, and enjoyment.  I am happy to look back at where I came from, and compare to the things I turn now, and it always makes me smile.  I wonder what my old woodwork teacher would think of what i am doing now?
What was the first thing you made?

Monday, 14 January 2013

MC900 Wood Lathe


A while ago I talked about my very first wood lathe, well today I shall talk about my current wood lathe.  After a year with my ebay lathe I decided the bug had taken hold and it was time to upgrade.  A little research and I settled on the MC900 form Carbatec.   The reason for my choice, availability (they were in stock and only an 90 minute drive away) and they were within my small budget.
DSCN2228
One point first of all, it is heavy and is a two person lift.  This was frustrating when I got home waiting for someone to help me lift it out of the box and bolt to the bench (which I had newly constructed for the purpose). 
OK so onto the actual review.  The MC900 seems to be available with a variety of different badge names, but presumably roll out of the same factory in China.  I will state now you get what you pay for, and at $497 it is at the budget end of the market.  It is not as smooth as a Nova or Wood fast or higher end lathe.  It can be noisy and the drive belt is a little rattly in sound though doesn't slip. 
029
I like the variable speed handle on the front giving a range of speed selections from 500RPM through to 2000RPM.  However, the minimum of 500RPM can be too fast some projects, especially heavy objects that aren’t balanced.  In fact I did have a big lump of red gum on there that I nearly shock the house down before I could press stop.  This lack of a really slow speed I find a shortfall, however for most of my turning, mainly pens and already round bowl blanks it does the job easily.
028
The variable speed drive worked nice and smooth on purchase, but now three years down the track it is a little stiff to change down speeds even with a little TLC and preventative maintenance (I expect I will need to replace the drive belt soon).
It is certainly a sturdy cast iron construction, although the legs supplied do look a little flimsy and may require some additional bracing.
031
I was seduced by the rotating headstock for bigger items, but if truth be known I have used it twice, neither time I was comfortable with.  The head is easy to turn, just release two nuts and has three positions.  The lathe comes with an extension Banjo for outrigger turning but it never seems to fit in the correct spot.  The tool rest also is a little chunky for small turnings and you cant always get close enough for thin objects (a definite downfall for making pens).  In addition the tool rest is a little long again getting close to the headstock spindle and tailstock for short barrel pens.  The position of the drive motor is also not ideal, it is close to the dust and can get in the way of some bits of wood when using a small face plate.
027
Although a nice solid construction I have found that the friction nuts below the banjo and tail stock do become a little loose and are hard to access to tighten whilst mounted to the bench. There are a few things I wish it did have. Firstly a lockable and index able headstock, for ease of chuck change and allow more intricate work. Secondly a hand wheel on the headstock so that it is easier to turn the spindle to rotate the work piece.
So am I happy with my Lathe?  Yes.  It was the right lathe for me at the time and price, and will continue to cover my needs for the foreseeable future.

Wednesday, 9 January 2013

It’s cricket Jim, but not as we know it…


I love cricket, I have done for a long time.  I remember long lazy summers playing cricket at school and for my local club.  The advantage of age is that memory gets hazy, from here I can remember me as a junior Bradman, not the player I truly was.
I remember my Dad and brother heading to the Oval to watch England play in a test match each summer and waiting to be old enough to go.  Eventually that time came.  It was great, a sunny day, a packed lunch from Mum and a whole day watching the aeroplanes flying overhead on approach to London Heathrow (apparently there was something going on on the pitch but who really cared about that).
Ever since then my older brother, dad and me have tried each summer to get to the cricket, whether it be a test match or a one day game.  Over the years this has become harder and harder.  Last night we managed to honour this tradition with a trip to the MCG in Melbourne for the domestic T20 clash between the Melbourne Stars and Sydney Thunder. 
mcg1
I will put it on the record now, this is not true cricket.  It is not cricket in its purist form.  There is no battle between batsman and bowler.  No admiration for the perfect shot.  It is a neatly packaged, made for TV, younger generation friendly form of the game.  Only twenty overs each, time limits, cheerleaders, kiss cams and fireworks.  It is not cricket………yet it is strangely alluring. 
mcg2
The knowledge that the batsman will have to go for the big shots, that there will be mistakes. We love run outs and the humiliation of dropped/missed catches.  You know that there will, or at least should be action a plenty.  On this occasion there was.  It is a great way to get the younger generation through the gate, and judging by the age of the crowd it was works. 
mcg5
We may have stepped away from tradition and become even more slave to the now generation, but to keep the game relevant it certainly crosses the boundary well from competition to entertainment.

Monday, 7 January 2013

Bloggy Christmas and a Bloggy New Year


It has been quite a while since I blogged, I was busy ok.  The lead up to Christmas is always busy at Quackadoo, so I spent many days in hotel rooms, chasing lost passengers and the setting sun.  Luckily this year I was rostered of for Christmas so got to spend it with my loved ones, but I did spare a thought for all those out there working.  Funny, when I was younger I thought only firemen and policemen worked Xmas, how wrong I was, for many it is just another working day.
Not only was the aviation game busy leading up to the big day but so was my workshop.  It was my youngest' last year at pre-school, so we wanted some good presents for her fantastic teachers.  Last year my wife led the way with mug rugs and coffee cups, this year was my turn and pens.  My daughter picked the acrylic colours and my son helped to drill the blanks.
DSCN6360
The pens were well received by all the teachers, especially as they had my daughters input.  I also had some pens to knock out for a great project run on the woodwork forums sight called “pens for the troops”.  A couple of times a year pens are sent to service personnel overseas as a gift from home.  This is the second time I have participated and am sure I will be back for more.
DSCN6397
Finally was my pen swap for the IAP Fall PITH.  This is always fun, swapping pens with people overseas. Here was that I sent, rosewood and she oak Polaris. Pens swaps are great and if you want to be involved the woodwork forum is holding one here.
DSCN6050
Now that the silly season is over what does this year hold?  Hopefully a few more blog posts, hopefully a new house to talk about and maybe I will get around to some more reviews including this bad boy .
bosch
Until then sit back, relax and enjoy the journey.

Wednesday, 14 November 2012

Dealing a quick deck


The house we are staying in (well squatting if you ask my parents) has a short decked path way at the front.  This deck must have been laid when the house was built, and that must have been a while ago.  It was loose, broken, creaking and bouncing all at the same time.  After a large cracking sound was heard the other day as I floated across it, I decided it was time to re-surface it.
It was a simple task. I measured the current decking wood to see if there was a similar size replacement (90mm x 22mm) which I discovered there were two.  The choice was treated pine or Merbau, I went the Merbau, it has a nice reddish/brown colour, is strong and hard wearing.
deck1
I am un-imaginative at times so I just replicated what was there already,removing the old boards and replacing with the new.  I was going to rip the whole old deck of but decided I was likely to get bored, it rain or I get called to work and didn’t think only half a deck would be appreciated by the family.  Previously the wood was held down by nails, this has been replaced by stainless steel decking screws.  I left the boards long to cut the shape at the end.
deck3
Years of watching Better Homes and Gardens had paid off with setting out the spacing.  It is really simple, two nails to get an equal gap each side, magic.
deck2
A few hours later and was done.  With a Jig Saw I trimmed the edges to the desired shape.  Now the deck is firm, and looking good, all it will need is a coat of oil each spring and it will last forever (well at least long enough for my house to be built, me move out and be a long way away).
deck4

Monday, 12 November 2012

That will take two weeks

Sometimes you just feel like shuffling up to a sturdy, well constructed, brick wall and smashing your head against it.  Customer service in this country has well and truly gone down the toilet, and the lunatics are running the asylum.  If I did my job the way many I have dealt with lately do, planes would be falling out the sky, and I would have to explain over tea and biccies with the boss my abject failures, and to my wife our new found poverty.

I will back up my stance with a few examples.  Moving house we needed to change Internet providers.  Our national telco was the go, but after ten hours of phone calls, they decided they did not have the infrastructure to provide us with broadband.  They could however give us wireless at twice the price for a fifth of the data.  We asked another provider who after one call had hooked us up with broadband, using the national telcos infrastructure.

Then there was car insurance.  Having bought a new car I phoned my insurer, only to find them closed on a Friday, apparently staff training.  In fact it was not training but the staff Xmas party.  Having been closed all day I held for an hour on the phone as they had not thought to put on enough staff to cover the extra calls.  When I was told somebody would phone me back I cancelled my account there and then.

Finally, my current leading frustration, house building.  We seem to have been going for decades on this project, though only a year.  I look physically older every time I talk to our builders and we haven't even gone to council for permission yet.  Every time I ask a question there is a two week delay in receiving the changes.  A month after signing a contract, we still have not heard how much eight extra power points will cost (not hard to do 8xcost per PowerPoint).  We need a bush fire report, yet after asking a dozen times, a month after contract signing it has only now been ordered.  If this blog suddenly ends, it's because I have gone loco and either attacked a builder or started building myself.

All I ask is that people take some pride and do there job properly, and in a timely manner.

Wednesday, 7 November 2012

A present for myself

I love a bargain, who doesn't?  My wife has trained me to always be on the look out for a bargain, and she has trained me well (though not yet to her standard).  So there I was in the local hardware store picking up a shelf for the bathroom when I stumbled across "Clearance Items".  Not only clearance items, but clearance Kinchrome tool boxes!  Yes, I was excited, there may have been a quick deep breath and furtive glance to see if there was any competition around for them. 

I have wanted a new big tool box for ages, but had said I wouldn't do it until we got the new house.  However, with so much less space everything that had hung on walls is now stuffed over flowing into my poor tool box.  The little demon in my head said buy, buy, buy! But the good angle of conscience said no, wait, wait, wait.  Don't you hate that little conscience fellow.  Think of what that money could be used for.

I battled with my demons and decided that I would walk away, possibly trying to with-hold a sob and trying not to look back. I did say that if I went back and it was still there it was meant to be.  Three minutes later I was back. Okay it was three days later.  But there it was, and she would be mine, oh yes, she would be mine.

A quick rummage through the draws behind the sales desk to see if they could find the keys and I was the proud owner of this bad boy.  Reduced by over $200, I could nearly convince my wife it was a bargain and folly not to buy it (I said nearly).






Now I can have the fun of transferring tools from one box to another and getting rid of my old tool box, well not rid of, just a bit emptier.

How do you keep your tools warm and cosy?

Sunday, 4 November 2012

A Quick Quartet

 

Having set up the new work shed today it was time to test it out.  Here was a quick quartet of acrylics.  Two Rifle Bullet pens in Australian camouflage, and green and gold Cigar and what I like to call the purple haze click. 

DSCN6218

The purple haze was bought from a bargain bin for about $1, it was brittle and nasty to work with. Every time the tool touched the blank it seemed to chip, but a sharp tool, slow speed, some sanding and patience paid off. I think it looks great.

DSCN6213

Christmas is coming and some of these pens are available at my etsy store, get in quick or contact me direct.

Saturday, 3 November 2012

In the Beginning

In the beginning there was a yearning, a need for something creative, a need for a hobby, a need for something for me.  I had always had an interest in wood (i think I've said that before) but I needed a push.  My wife had been nagging me to get a hobby, but I had been putting it off. It was only after a trip to Tassie that I caught the bug (and it is a bug).  A trip to Strahan where I watched an experienced man turning wood and I smelt the Huon got the heart fluttering.

On return from that family holiday I scoured eBay looking for wood lathes.  Everyday I would log on and see what was new out there, but they all seemed expensive.  I didn't want to spend a lot of money, I didn't know if I would enjoy it, or be any good at it.  Then one day it was there.  It wasn't a great looking lathe.  It was a fairly common Chinese made lathe that seems to have been produced for GMC, Ryobi, Dynalink and many, many more (mine was Brook Crompton).




It was very simple.  Four speeds changed by a pulley, with a disc sander on the back of the headstock.  I loved this lathe for two reasons, it was local and came with some tools, plus it was cheap, I guess that's three things.






I paid about $150 for it which I thought was good, especially when I found it came with three Robert Sorby tools as well as a pack of cheap tools.  All I needed to learn and practise.  I bought some cheap pine to play with and I was off and running.





This was my first effort, its abstract but I just wanted to combine steel with wood and make shavings.
After a few months I had realised the limitations of the lathe without a chuck and bought one of those (I will review that later). Then it was a pen mandrel, and lots of pen parts!  But I needed to upgrade and after twelve months I did (I will review that to sometime).  This old machine went back on EBay, and sold minus a few of the tools for $100.  All in all I had found a hobby and a passion all for the bargain price of $50, I love bargain!

What was your first wood working toy?


Wednesday, 31 October 2012

The vagabond traveller

I love Indian Jones, all the movies were great, well if you don't count the Crystal Skull.  Anyway I digress.  On Sunday we visited the local markets and I came across a fantastic stall selling leather goods. Not just leather, but goat leather.  On the stall were some great leather bound note books, something you could imagine Indian Jones sketching and writing in.  I immediately decided I needed one!


The books are beautifully bound with thick paper.  Now I am not sure what I will use it for, it's far too nice to write in.  I did however want to pull out a fountain pen and just write. Not a good idea as I'm told that my hand writing is like a drunken spider crawling across the page.  Instead at the moment the book will be used as a prop for pen photos, and to hold whilst running around the house avoiding cascading boulders and acient booby traps.


Their collection was not limited to books, they had some great bags. Maybe one of these for work?


If you love such great items and can't make Shellharbour market they also have a website to check out. www.vagabondtravelgear.com

Just to keep everybody happy, I have no connection with this company, just giving another small company a plug. 

Sunday, 28 October 2012

A useful mistake

A while ago I made a pen, not that unusual I guess.  I had bought a black acrylic with gold glitter in it from Gary Pye Woodturning Supplies and thought it would look great as a Cigar style pen with gold fittings.





All had gone well with the drilling and gluing of the blank.  I was ready to turn what I thought would be a great pen.  Unfortunately the fickled finger of fate hang in the shed that day and disaster struck.  A moments lapse in concentration?  A tool not sharp enough? A weak part in the blank? I don't know what it was, but I put a deep chip in one end.  It was not the life ending drama I had thought but enough to produce a few curse words and to kick the waste bin across the shed.  However I decided not to give in.  I took the blank of and re-squared the end with a pen mill and returned.

I knew that the pen would be too short for the cartridge, but had my fingers crossed I could modify it, or that by some miracle the pen nib would still retract enough.  I was wrong.

pen retracted

When the pen was fully assembled it did not retract all the way, not by a long shot, not even if I modified the transmission (something I have done before).  However I loved this pen.  It looked smart, had great balance of colour (something I haven't captured in the photo) and is extremely comfy to hold.





It may not have turned in to a sell able pen, or a display pen but it is my favourite everyday pen.  I use it when studying, writing lists and just leaving it lying around on the bench.  It may have been a mistake, but it has certainly been a useful one.  It also meant the pen got the use it deserved, not just sitting in the box with the rest of the pens.





Have you every made a mistake that worked out well?

Monday, 22 October 2012

A little shed is born

Those who have been following this blog (you are few and far between but are out there!) will know we have been moving.  It has taken a few weeks to settle in to our downsized environment but we are getting there.  My concern has always been space, it is limited.  With such limited space I was wondering whether I could even create a work space for me.  No lathe for twelve months, to scary to contemplate.  Unfortunately the garage was full from the move.


Now I am a packing master.  I have moved several times and fitted my whole life into a car.  Unfortunately with life comes family and lots of stuff.  I can no longer move in a car.  I knew that the garage could be salvaged to some extent but just opening the door was enough to make this grown man think twice.  Where to start? How top stack?  When was the last time i played Tetris?

As with any project a quick mental plan and empty out the space to start again.  The thought of removing every item wasn't pleasant and I had been putting it off.  This weekend I was off work so it was time to tackle the beast (and spiders, many, many spiders).  With my five year old daughter to help we moved, stack and re-arranged.


As there was some furniture being stored it had to be well covered to avoid too much wood dust.  It was surprising how much room was opening up.


It took most of the day, and of course I picked the hottest day for months, but it came together.  I finally had my space in the house.  It may not have been my best packing job but it was up in the top three.  It may not be large, it may not be complete.  I still have to arrange equipment and bolt it all down but my mini-sanctuary has been re-born.


Now I just have to find time to play in there!  Have you ever had to downsize your shed?

Friday, 19 October 2012

The Plywood Palace

We have a Guinea pig, well its my daughters pet but we all get the odd cuddle.  It is only a baby and still small, but lonely.  It was decided at a recent family meeting (well I was told it was decided) that Tickles needs a friend.  No problems with me, as long as it is male as I do not wish to accidentally enter the Guinea pig breeding business.  Anyway, to accommodate the new impending arrival we needed a bigger cage.  Being a red blooded male with a fetish for wood working I was excited about building the Guinea Pig Taj Mahal.  Even though I have no work shop at the moment I was not put off and started sketching up some ideas.


I had great ideas for multiple levels, penthouse and tunnels.  Obviously room in the house wasn't a consideration.  Unfortunately the operations manager had other ideas.  She had done her research and taken into account my love of over engineering things and lack of shed space, and presented me with a big box.

Obviously in the box was a prefabbed, do-it-yourself flat pack plywood palace.  It was a good price, made in China and broke my heart.  I soon put the disappointment that my palatial plans were on hold, and set myself to the task at hand.

I am not one for instructions, which real man is?  On this occasion this was of benefit as the supplied instructions, were poorly written and didn't really represent the bits in the box.  This just added to the challenge, as did the fact that pre-drilled wholes didn't line up, nor were they always completely drilled.






However perseverance paid off and before long the plywood palace was constructed.  It does however need a few modifications and a good sand before I'll be happy.  Mr Tickles however does like his new home.




Perhaps when this one falls apart, and looking at the quality it wont be long, I will be able to create the true master piece that is lurking in my head.  Do you think solid Mahogany would be too much???